Overwhelmed by the Complexity of Experts? This May Help

Camden Plumbing 2017: When Do You Need to Replace Your Water Heater

When it comes to your water heater problems, regular maintenance can help in prolonging the lifespan of your heater and leaking or not heating issues can be handled through repair instead of replacement. Simple repairs like replacing a heating element or pressure-relief valve can resolve water heater issues and learning some troubleshooting tips can help you in managing your own water heater problems. You can always contact a professional such Camdem Plumbing Consultant to help you with any of your water heater problems, though simple water heater repairs that can be done DIY. The average life expectancy of a water heater is eight to twelve years.

According to a Camden Plumbing Consultant, it is best to replace your water heater if it is already more than 10 years old, with noticeable leaks surrounding the base of the tank, not working, or erratically works. The most common problem connected with a water heater is that the water is not as hot as you expected or you want it to be, which is usually caused by a defective heating element, or a faulty thermostat. When maintaining your electric water heater, it is important to ensure that the power is connected, reset the thermostat, flush the heater to eliminate sediments from the tank, thermostat, and heating element replacement, and raising thermostat temperature. When it comes to gas water heater management, you have to replace the Thermo coupler and clean the burner, ensure that the pilot is lit and the gas is connected, remove sediment by flushing, insulate hot water pipes, and raise the temperature setting on the thermostat. You have to drain your tank until the sediment clear to prevent sizzling or hissing noises coming out from your water heater. Removal and soaking of elements in a pan filled with vinegar should be done for up to an hour, and collected scale are scraped off. Replacement of leaking pressure-relieve valve must be done. Replacement of water fittings should be done if tightening them does not work.

Water heater must be drained twice a year to remove sediments high cause corrosion. A burst of water should be released as you lift the pressure-relief valve handle and snapping it back, otherwise it needs replacement. When replacing your water heater, you need to consider the following features: gallon capacity (40 50 5 liters), recovery rate (number of gallons heated in an hour), dimensions and energy efficiency ratings. If you need help with water heater replacement, feel free to check Camden Plumbing Consultant now on their website.Questions About Experts You Must Know the Answers To

Looking On The Bright Side of Experts